Plastometer PF-12

For Measure Plastic Properties of Coal

Features

  • The PF-12 plastometer is intended for measuring plasticity properties of black coal heated under the conditions defined by the ASTM D 2639 – 08 and ISO 10329 standard. The outcomes of the test are plastometric indicators of the coal.
  • The PF-12 plastometer is a fully automatic, compact, single-furnace instrument. A single furnace with molten solder bath is equipped by sophisticated control system of heating range, heating rate to ensure the required accuracy level to meet the requirements of 6.3 of ASTM D-2639-08, ISO 10329.
  • For quick cooling, the furnace has a built-in fan (allowing another test to be started shortly afterwards).
  • Automatic evaluation of the final results form 2 or 3 tests according the standard requirements ASTM D-2639-08, ISO 10329
  • Build – in exhaust device
  • The temperature measurement failure detection
  • Cooling of the furnace by the fan
  • Automatic assessment of each test and the overall result
  • Automatic creation of * csv files for statistical analysis

Specifications

Preheating temperature setting
200 deg.C (selectable)
The operating temperature range
200 to 650 deg.C
Temperature gradient
As per ASTM / ISO Test Methods
Accuracy of temperature control
± 1°C
Setting of safety final test temperature
Upto 600°C (selectable)
Test retort
Dimension as per ASTM D 2639 – 08, ISO 10329
Power input
0.8 KVA
Bath stirrer speed
300 to 1000 rpm
Plasticity range
1 - 100 000 D.D.P.M.
Cumulative plasticity range
999 999 D.D.
Plasticity resolution
Better than 0.1 D.D.P.M.
Measure and report all characteristic
Initial softening temperature as per ASTM D-2639-08, ISO 10329
Temperatures
- Maximum Fluidity temperature as per ASTM D-2639-08, ISO 10329
- Maximum Fluidity in D.D.P.M as per ASTM D-2639-08, ISO 10329
- Plastic range as per ASTM D-2639-08, ISO 10329
- Final solidification temperature as per ASTM D-2639-08, ISO 10329
- All at 1 D.D.P.M repeatability of 5 deg.C, ASTM D-2639 – 08

Similar Products

Request a Quote

Leave us your details and we will contact you soon.