CSBOX HFA-TUBE D CS Analyzer
Carbon And Sulphur Analyzer for Inorganic Samples by High Frequency Induction Furnace
UOP703-09 DIN 24935 DIN EN ISO 9556 ISO 13902 ISO 4935
- Iron
- Steel
- Cast Iron
- Refractories
- Rocks
- Cements
- Catalysts
Carbon And Sulphur Analysis by High Temperature Tube Combustion Technique
- User friendly design of Sylab, where furnace is isolated from
the infrared analyzer to improve the life of the NDIR analyzer - Automatic crucible loading with tool free auto cleaning of the
combustion tube - Fully Computer controlled operation through software
- Two individual solid state IR detectors for Carbon and sulphur
- Powerful Induction furnace for Inorganic samples analysis
- Single and Multi-point calibration facility
- Vertical furnace design with single sample auto loading
Item: CS Box HFA-Tube D CS Analyzer
Application: CS Box HFA-Tube D CS Analyzer is equipment for the carbon and sulfur determination in organic as well as inorganic samples like alloys ,ashes, carbides, cast- iron,cement,ceramics,coal,coke,copper,glass,gypsum,iron,limestone,metals,minerals,oil,ores,plant materials, refractory metals, rubber, sand, soils, steel, titanium, tobacco.
Measuring Technique: CS Box HFA-Tube D CS Analyzer is equipped with both an induction and a resistance furnace up to four highly sensitive infrared (IR) cells allow for precise measurement of both high and low carbon and sulfur concentrations in only one analysis.
Complies Standards:
Measuring Range:
Accuracy
Analysis Time:
Induction Furnace 40 -50s
Resistance furnace 60-120sec
Chemicals Required: magnesium perchlorate, platinized silica (alternatively copper oxide), sodium hydroxide
Sample Weight: 200kg
Furnace:
Furnace alignment: Horizontal (resistance furnace)and vertical (Induction furnace)
Sample Carrier: Ceramic boats/ crucibles
Furnaces:
Induction furnace, above 2000 deg C
Resistance furnace (ceramic Tube), adjustable up to 1550°C (steps of 1 deg C)
Cleaning: The CS Box HFA-Tube D CS Analyzer has an automatic combustion Tube cleaning, and no tools are required for combustion tube exchange (glove-box technology)
Detection System:
Detection Method: Solid State infrared absorption
Number of IR Cells: 1-4
Material of IR path: gold
General Requirements:
Ambient Conditions:
Power requirements induction furnace: 230V, 50/60 Hz, 16A fuse
Power requirements resistance furnace: 230V, 50/60Hz, 20 A fuses
Required Gas: Compressed air (4 – 6 bar/ 60 – 90 psi)
Oxygen 99.5% pure (2-4 bar / 30 – 60 psi)
Required Accessories: Computer, Monitor, Balance